How Much Does a Paver Walkway Cost in 2024?

The national average cost of paver walkways is $2,480, with prices ranging between $1,430 and $3,530.

Building a paver walkway will cost between $1,430 and $3,530 ($9 and $20 per square foot), or about $2,480. Based on the project’s complexity, a paver walkway can cost as much as $4,665.

Paver walkways have a cool aesthetic as well as practical functionality. These walkways usually last decades and are easy to repair when damaged. While they can be on the pricier side compared to their alternatives, they can be worth the investment in the long run.

This walkway cost guide will go through the typical factors that affect the total cost of a paver walkway installation.

The topics covered here include:

Average Costs of Paver Walkways in 2024

National Average Cost$2,480
Typical Price Range$1,430 – $3,530
Extreme Low-End Cost$1,400
Extreme High-End Cost$4,665

On average, a paver walkway costs around $2,480, with prices ranging from $1,430 to $3,530. A simple, smaller paver walkway might cost around $1,400, whereas a complicated, large project with high-end materials and aesthetic upgrades can come to as much as $4,665. These prices are based on the average costs of paver walkways per square foot, which usually range between $9 and $20 (an average of $14.50 per square foot).

To save money on this project, you can:

  • Get multiple quotes from various contractors in your area
  • Install a smaller walkway
  • Opt for a simple design with no added features
  • Excavate your paver walkway area yourself 

Paver Walkway Cost Estimator by Size

One of the factors that can significantly affect the price of a paver walkway is its size. The larger the walkway, the more material will be required for its construction, thus increasing costs. Using the average cost of paver walkways of $14.50 per square foot, we have worked out how much your project might cost based on size.

Paver Walkway Size
Average Overall Cost
20’ x 4’$1,160
35’ x 4’$2,030
70’ x 4’$4,060

Paver Walkway Cost Estimator by Type of Paver

Pavers come in various shapes and sizes. Below are some of the most popular kinds of pavers along with their estimated costs, including installation.

Concrete Brick Pavers

Concrete brick pavers are a common, yet appealing option that are on the more affordable end of the spectrum. The cost ranges between $8 and $15 per square foot, including installation. They’re easier to repair and maintain than fully concrete walkways, because damaged pavers can be replaced piecemeal.

The most popular color of concrete brick pavers is gray, but there are sometimes other alternatives available. They can be dyed to look like clay brick pavers, too. 

Because concrete isn’t permeable, the pavers must be laid out in a way that allows for drainage. The concrete pavers should also be sealed to retain their color and protect them against damage.

Clay Brick Pavers

Clay brick pavers are strong and durable. Like their concrete counterparts, they cost less than some alternatives without sacrificing the appearance of your outdoor space. Their prices, which include installation, are usually between $10 and $20 per square foot, depending on where you live and how complex your project is.

Clay brick pavers usually come in red but can be purchased in gray and tan as well. Although the colors can fade over time, a sealant can protect the color of clay brick pavers to keep them looking new for as long as possible.

Natural Stone Pavers

Natural stone pavers made out of materials such as flagstone, tumbled granite, cobblestone, or marble are one way to create a timeless design for your outdoor walkway. They can be laid out in an uneven way for a rustic, natural style. They cost from $12 to $50 per square foot, including installation.

Slate Pavers

Slate can add sophistication to your outdoor space. It’s a durable material with vibrant colors and hard-wearing properties. Slate pavers normally cost between $11 and $20 per square foot, including installation, but their cost can fluctuate based on your location and the complexity of your project.

Because slate pavers can be challenging to install, some homeowners opt for concrete slate pavers instead, which can be effective when it comes to costs and labor.

Other Types of Pavers

While the above are some of the most popular options for pavers, there are many alternatives available, too. Examples of other types of pavers include rubber pavers, porcelain pavers, and even plastic pavers. Each of these pavers comes at a different price with its own design and appeal, and requires various levels of maintenance. Ultimately, it’s up to each homeowner to decide which paver type is the best fit for their home.

Other Factors That Affect Cost

There are various factors that can affect the cost of a paver walkway. In addition to size, the complexity, labor requirements, prep work, decorative additions, permitting all affect the final cost.


A simple, straight path will be cheaper than a complicated walkway with lots of bends and hard-to-reach spots. A more complicated project costs more because it takes more time and money to finish. 


On average, contractors charge around $75 per hour to install a walkway. More complex projects can drive up labor costs, as it will take more time. 

Prep Work

Your walkway may need to be prepped before your pavers are installed. Prepping can include grading, which typically costs between 8 cents and $2 per square foot. The removal of old dirt and concrete can cost an additional 30 to 50 cents per square foot

Decorative Additions

Sometimes homeowners want to add an extra touch to their walkway, such as staining, walkway covers, or stamps. These can come at an additional cost, and their price varies depending on the complexity of the design. On average:

  • Staining concrete can cost an extra $2 to $4 per square foot (single color)
  • Walkway covers can cost between $4 and as much as $230 per square foot
  • Stamped concrete usually costs between $8 and $28 per square foot


Sometimes you need a permit to install a concrete walkway, especially when the walkway will connect to a public road or sidewalk. Your permit can cost between $200 and $1,000. Consult your contractor to find out whether or not you’ll need one.

Related Services

If you want to install a paver walkway, chances are that you’re also after various other outdoor and home improvements. Therefore, when figuring out how much your project will cost in total, don’t forget to add in the costs of any related projects. 

Paver Patio

You may be looking to install your paver walkway together with a paver patio to create an aesthetic outdoor living space. Paver patios cost $2,251 on average, with prices ranging between $2,275 and $6,950. Alternatively, you can also choose a more budget-friendly patio material

Paver Driveway

Again, to match the overall appearance of your outdoor area, you might want to put in a paver driveway as well. Because the driveway will be a lot wider and thicker than the walkway, the cost will be significantly higher. The average cost of paver driveways is $13,000. You can also consider other, more budget-friendly materials. For comparison, a pea gravel driveway can cost as little as $1,500. There are various kinds of driveways out there, so if you’re interested in installing one, ensure to complete adequate research to decide which one is best for you. 

Retaining Wall

A retaining wall can be a great addition to any property. It can add aesthetic appeal and offer functional value as well. Depending on the size and type of wall, its installation can cost between $40 and $345 per linear foot


To create an aesthetically pleasing and budget-friendly outdoor living space, you may want to invest in landscaping, which normally costs between $4.50 and $17 per square foot.

Paver Walkway Cost vs. Other Walkway Types

There are different kinds of walkways out there. Below is a table with the average cost of their initial installation.

Type of WalkwayNational Average CostTypical Price Range
Paver walkway$2,480$1,430 – $3,530
Concrete walkway$1,620$1,080 – $2,160
Pea gravel walkway$335$275 – $395

Compared to alternatives like concrete and pea gravel, pavers are not the cheapest to install. They can, however, be more suitable than concrete walkways, as they’re durable and easy to repair. They also add value to the property when compared to pea gravel walkways. Paver walkways can therefore be more cost-effective in the long run. 

Pro Cost vs. DIY Cost

Installing a paver walkway yourself is possible, but not necessarily recommended. Just like the cost of professional installation, the cost of DIY installation varies based on the complexity of the project as well as other factors.

DIY Equipment and MaterialsAverage Cost
Pavers$5 per 16” x 16” stone
Tape measure$18
Crushed gravel$800 per pallet
Garden rake$20
Garden hose with nozzle$45
Paver sand$5 per bag
Finishing trowel$20
Concrete saw*$1,000
Safety glasses$14
Construction adhesive$5
Work gloves$15
Dust mask$25
Polymeric sand$30 per 40-pound bucket
Leaf blower$130
Total for a 35’ x 4’ walkway:$2,978

*You may need a concrete saw if you have to cut pavers.

Not only do you need to know how to do it yourself, but you also need a long list of materials that you probably don’t have on hand. Due to the equipment and materials needed, a DIY paver walkway installation will work out to be more expensive than hiring a professional for most people.

However, some people like to embark on DIY projects and install their panels anyway. If you’d like to install your walkway yourself, you can watch the basic step-by-step video guide below: 

Paver Walkway Cost by Location

Your location may affect the labor and material costs of your paver walkway project. You’ll be able to get lower prices if you can source your materials locally. Ensure to also ask your suppliers if they have a minimum purchase requirement. Typically, the delivery of paver walkway materials costs $0.50 per square foot. Get quotes from multiple contractors to find the best deal.


How long do pavers last?

Pavers come in different types that vary in durability. Typically, however, pavers can be expected to last anywhere between 50 and 100 years. Unlike concrete, they can be easily repaired. Furthermore, they typically require fewer repairs over time. 

How many pavers do I need?

Decide on the size of your project and the size of the pavers you want to use. You’ll then need to calculate how many square feet each paver covers. Divide the total square footage of your walkway by this number. You should end up with the correct number of pavers you’ll need. 

How much does a pallet of pavers cost?

You should find the exact cost of a pallet of pavers on its packaging. Typically, the cost of a pallet of pavers will be between $335 and $1,165. This pallet may cover between 100 and 160 square feet. 

Final Thoughts

If you’re looking to install a new walkway, you may find that paver walkways are both aesthetically pleasing and pragmatic. It’s relatively easy to repair these walkways, which means they can often be maintained for decades. Even though they may appear expensive at first, paver walkways are a long-term investment that can be worthwhile.

Note: LawnStarter may get a referral fee for matching you with contractors in your area.

Main Image Credit: JPLDesigns / Canva Pro / License

Judith Gallova

Judith Gallova

Judith Gallova is a freelance writer who created her first blog at the age of 10. Later, she started working in marketing and eventually combined her writing and marketing skills to become a freelance writer. In her free time, she studies the Bible, goes to the gym, spends time with loved ones, and enjoys all things outdoors.