How Much Does a Brick Wall Cost in 2024?

Building a standard brick wall costs an average of $5,000 nationwide, but professional installation costs can range from $2,410 to $8,050.

Brick is a good option for people looking to build a classic and decorative fence or wall. They’re less expensive and more durable than other masonry materials. On average, a new brick wall or fence costs $5,000, but prices nationwide range from $2,410 to $8,050.

The cost of materials is about $10 to $45 per square foot, and the labor rate is somewhere around $60 to $105 per hour. The total cost homeowners spend to build a brick wall comes down to many specific factors we’ll explain. 

Here is everything this cost guide covers:

Average Brick Fence Costs in 2024

National Average Cost$5,000
Typical Price Range$2,410 – $8,050
Extreme Low-End Cost$1,175
Extreme High-End Cost$14,665

The national average for a standard brick wall is $5,000, with the price per square foot falling between $10 and $45. Homeowners often spend between $2,410 and $8,050 for brick wall construction. The variation in cost is due to the project’s complexity, which determines the effort and time required to complete the installation.

At the top of the price scale, a large, double-skin wall costs $14,665, while a small, single-brick thick wall averages $1,175

The overall cost will go up if you opt for ornamental brick walls, elaborate designs, and finishes. However, if you want to save money on installation costs:

  • Build smaller walls or fences
  • Use plain and single bricks
  • Avoid additional brick finishes
  • Opt for DIY brick wall construction instead of hiring a professional

Brick Wall Cost Estimator by Size

Among the factors affecting the cost of building a brick wall, the size of the area to be enclosed is one of the most important. The larger the wall, the more materials required. On average, brick walls cost between $10 and $45 per square foot, but this varies with the type of brick material you choose.

Type of Brick MaterialCost Range Per Square Foot
Traditional Brick$35
Hallow Brick$20 – $30
Brick Veneer$10 – $30
Thin Brick Veneer/Mini Brick Veneer Strips$5 – $15

Cost of a Brick Wall by Type

Every masonry fence wall installation is unique. Each type has its structural requirements, material quantities, degrees of complexity, and of course, its price range. Here are different types of masonry and their specific costs. 

Brick Fence

Building a brick fence costs between $17 and $40 per square foot. However, the cost depends on factors such as location, size, and additional elements such as wrought iron, stone caps, and gates. 

If the mason combines the brick with other fencing materials, such as a wood fence, expect to pay $15 to $30 per linear foot, or $20 to $35 per linear foot for a vinyl fence.

Garden Wall

A brick garden wall will cost $20 to $30 per square foot if you use a typical clay brick, while a concrete block garden wall will cost $15 per square foot. Depending on the garden’s dimensions, a raised garden bed costs about $400 to $600.

Privacy Wall

A tall, solid brick fence can combine beauty and privacy for homeowners looking to combine the two. A brick privacy fence typically costs between $35 and $45 per square foot or about $200 to $350 per linear foot.

Interior Wall

Interior walls are usually thin brick veneer instead of regular brick that contractors use to face an existing wall. Depending on the type of brick used and the installation method, it costs between $5 and $15 per square foot to install an interior brick wall.

Brick Column or Pillar

Brick columns are a good alternative to a whole brick wall. The type of brick column you want to install will determine the cost. An ornamental brick column costs between $500 and $1,935 to install, while a structural brick column costs between $2,000 and $6,665.

Other Factors That Affect Cost

Some other factors can add to the cost of building a brick wall. You should consider them when estimating costs.

Materials

The cost of 1,000 regular solid bricks is about $350 to $900, depending on the type of brick you choose. However, complex designs that require a combination of materials may increase costs due to additional materials and labor costs.

Labor

Hiring a bricklayer is the best option if the wall is primarily brick. Their cost typically ranges from $60 to $105 per hour. Expect higher labor costs if the project takes more time and requires more complex designs.

Property Line Survey

Knowing the precise land layout before installing a wall or fence along your property line can save you some encroaching problems. An average surveyor charges about $360 to $645 to complete a survey to find your exact property lines. 

Drainage 

Installing a drainage solution impacts project costs but also minimizes cavity damage and other problems that could potentially lead to high maintenance costs, providing a longer life for the wall. Proper drainage costs between $2,000 and $5,800.

Permits

You may need a permit to build a brick wall. The permit’s cost depends on the wall’s size, type, and location. Obtaining a building permit costs between $85 and $485. Contact your local office for permit approval.

Footing

To keep the wall from collapsing, you must construct a concrete footer for structural support. For most masonry walls, a concrete footing costs between $15 and $55 per foot, depending on the frost depth. If you want to hire a structural engineer to verify the foundation’s integrity, expect an average cost of $550 for their services.

Installation Area

The total cost of the project will also depend on where the wall is to be installed. Expect labor costs to be higher for sloped or difficult terrain due to excavation, leveling, and other additional work.

Brick Wall Finishes

You can embellish the brick wall with the following finishes for an additional cost:  

  • Stucco: $3 to $8 per square foot
  • Paint: $1 to $4 per square foot
  • Wood siding: $2 to $8 per square foot
  • Thin brick siding: $6 to $16 per square foot

These improvements drive up installation costs but simplify maintenance.

Brick Wall Repair Cost 

Brick walls can wear down over time or be damaged in accidents. When that happens, you need to get the wall repaired before it gets worse. It costs between $750 and $2,500 to repair a damaged brick wall.

Related Services 

The following services can serve your landscaping purposes or provide an alternative to a brick wall or fence. 

Brick Retaining Wall

A retaining wall is one of the few home improvement projects that also creates more landscaping space and reduces flood damage. Installing a brick retaining wall costs between $3,065 and $9,735.

Black Chain-Link Fence

A black chain-link fence is a budget-friendly and zero-maintenance fence that is suitable for any part of your property. A black chain-link fence costs an average of $2,850.

Wrought-Iron Fence

Homeowners looking for a customizable yet low-maintenance fence should opt for a wrought iron fence. A professionally installed wrought iron fence costs between $2,334 and $4,769.

Natural Stone Wall

Natural stone can also be used to build an eye-catching and colorful wall. Natural stone costs between $40 and $110 per square foot, including materials and labor.

Cost of a Brick Wall by Location

National average costs can change depending on geographic location. This discrepancy exists because labor costs and the cost of materials are not the same in every state. As a result, costs are higher in some locations and lower in others.

States with a national average within the $2,000 – $4,000 cost rangeStates with a national average within the $5,000 – $9,000 cost range
• Arizona
• Texas
• Illinois
• Colorado
• Missouri
• Montana
• Tennessee
• Florida
• Oregon
• Newyork
• Maryland
• New Hampshire
• California

FAQ

Can you build a brick wall DIY?

Building a brick wall or fence yourself is undoubtedly cost-effective and will save you between $60 and $105 in labor costs. However, expertise is required to achieve a professional result. If you are unsure of your skills, you should hire a bricklayer or mason to perfect the design and brickwork.

How long do brick fences last?

Compared to other building materials, brick is durable. On average, a brick fence can last up to 100 years. Additional finishes like painting and rendering can extend the lifespan.

How long does it take to complete a brick fence?

It usually takes two to three days to build a brick fence. However, it may take longer for detailed designs or demolition work.

Final Thoughts 

Given that bricks are low maintenance and last longer than other materials, spending $5,000 for a brick fence or wall is a worthwhile investment. Keep in mind that this cost can change depending on the type, size, and location of the wall.

Main Photo by: RawPixel

Ayoola Azzan

Ayoola Azzan

Ayoola Azzan is a versatile writer and investment enthusiast. He loves developing an impactful course and enjoys meditating when at leisure.